Skip to content

Homeowner guides

Architect or architectural technologist: which do you need?

Open plan kitchen, dining and living space in the Billericay rear extension
Open plan kitchen, dining and living space in the Billericay rear extension
Contents

The short answer

An architect is a registered professional who alone can use that title. An architectural technologist, usually a Chartered Architectural Technologist, is a design professional focused on how buildings are put together. For most extensions either can design and submit your plans. Choose on relevant experience, not the title.

Homeowners often meet both titles when they start planning an extension or a renovation, and it is not obvious which to hire. This guide sets out what each is qualified to do, what the law protects, and how to match the designer to a straightforward extension or a heritage scheme.

Key takeaways

  • Only someone on the Architects Register can legally use the word architect, but anyone can legally provide architectural services in the UK.
  • Chartered Architectural Technologist, MCIAT and FCIAT are protected titles awarded through the Chartered Institute of Architectural Technologists.
  • You do not need an architect to apply for planning permission, because you can appoint an agent to apply for you.
  • For a straightforward extension, the designer’s experience with similar houses and your local council matters more than the title.
  • For a heritage scheme, choose a designer who can show completed listed or period projects.

What is an architectural technologist?

An architectural technologist is a building designer whose training centres on the technology of construction: how a building is detailed, assembled and made to perform. The regulated professions database on GOV.UK describes architectural technology as “a professional design discipline focusing on the anatomy and physiology of buildings”, and says chartered members “are qualified to design, manage, and lead on all project types from inception to completion”.

Chartered status comes from the Chartered Institute of Architectural Technologists (CIAT). Its page on qualifying as a Chartered Architectural Technologist says you must first be an Associate member or affiliate, then demonstrate the required knowledge, experience and professionalism, either through a Professional Assessment or through a three-stage Professional and Occupational Performance (POP) Record built around 17 units.

An acrow prop supporting the structure in a Cold Norton bedroom as the strip out gets under way.
An acrow prop supporting the structure in a Cold Norton bedroom as the strip out gets under way.

What is the difference between an architect and an architectural technologist?

The practical difference is where each discipline puts its weight, plus the legal position on titles. The GOV.UK database says chartered technologists are qualified to design, manage and lead on all project types, and the law reserves no architectural work to either title. The table sets out what the sources say.

Architect and architectural technologist compared
QuestionArchitectArchitectural technologist
Protected title“Architect”, under the Architects Act 1997Chartered Architectural Technologist, MCIAT, FCIAT
Who keeps the recordThe Architects Registration Board (ARB), which keeps the Architects RegisterCIAT, the regulator named in the GOV.UK database
Reserved activitiesNone: anyone can legally provide architectural servicesNone: restrictions apply to use of the title only

Who can legally use which title?

Section 20 of the Architects Act 1997 says a person may not practise or trade under a name containing “architect” unless they are a registered person. The Architects Registration Board explains who can use the title architect: “It can only be used by someone who is on the Architects Register.” It adds that only “architect” is protected, so terms such as architectural consultant or architectural assistant are not covered, and that anyone, architect or not, can legally provide architectural services in the UK.

The GOV.UK database gives the equivalent position for technologists: no reserved activities, with restrictions applying to the use of the title only. In plain terms, neither title is a licence to do work the other cannot. What the titles tell you is which body to check and complain to.

Watch out

“Architectural technologist” on its own, without Chartered or the letters MCIAT or FCIAT, is not one of the protected titles. Ask which professional body the person belongs to and check the register before you sign anything.

Which suits a straightforward extension?

For a single storey rear extension or a kitchen extension on an ordinary house, either professional can do the job well. The title matters less than three things: whether they have designed extensions like yours, whether they know how your local planning authority treats them, and whether they can coordinate the structural engineer. Our guide to planning permission for an extension shows what the application involves, and whether you need a structural engineer covers the calculations that sit alongside the drawings.

You also do not need to be the one who submits it. The Planning Portal says on its who can apply page: “If you wish, you can appoint an agent to apply for planning permission on your behalf.” It gives the example that “you may prefer your architect, solicitor or builder to take care of it”. The agent does not have to be an architect.

The new single storey extension in Witham: vaulted ceiling with downlights, a recliner and dining table on a grey tiled floor, French doors and side windows to the garden.
The new single storey extension in Witham: vaulted ceiling with downlights, a recliner and dining table on a grey tiled floor, French doors and side windows to the garden.

Which suits a heritage scheme?

Listed and period homes raise the stakes, because the design has to be agreed with the council before any work starts and the detailing has to suit old fabric. Neither title guarantees that experience. What you want is a designer who can show completed listed or period projects and explain how they handled consent. Our listed building renovation page explains how we approach this kind of work.

Craig Bellamy, founder of Madisons, explains in his film “Do I need an architect for an extension?” that different projects call for different designers: “we’ve got a heritage specialist architect, we’ve got one that specialises on a modern home, and we’ve got other ones that are just a little bit more interior based”. The point is matching the specialism to the house, whatever the letters after the name.

Watch the film with its transcript: Do I need an architect for an extension?

How do you choose the right designer for your project?

  1. Write a short brief. Say what you want the space to do, the finish you are after and when you hope to start.
  2. Look at completed work. Ask for projects of the same type and size as yours, ideally in your area.
  3. Check the title. Search the Architects Register for an architect, or ask a technologist for their CIAT grade.
  4. Ask what is included. Drawings, the planning application, building regulations drawings and coordination with the engineer are separate pieces of work, so get the scope in writing.
  5. Ask who deals with the council. Know who answers planning officers’ questions and who pays if the design needs changing.

Tip

If you would rather not appoint and manage a designer yourself, our design and build team works with architects it knows and manages the process for you. Our partners page explains how, and our house extensions page shows what we build.

Craig puts the choice plainly in the same film: “If you want to, yes. If not, give us a shout. We can manage the whole process from start to finish.” Whichever route you take, agree the design before builders price the work, as Craig explains in should planning be approved before I ask for prices?

Sources and further reading

Frequently asked questions

Can an architectural technologist submit planning drawings?

Yes in practice, because the Planning Portal says you can appoint an agent to apply on your behalf and does not limit that to architects. A chartered architectural technologist is qualified to design and manage projects, so it is reasonable to ask one to prepare your drawings. Check they have handled applications with your local planning authority before.

Is an architectural technologist cheaper than an architect?

Not as a rule. Fees depend on the practice, the size and complexity of the job and how much of the process you ask them to take on, not on the title alone. Ask two or three designers for a written scope and fee for the same brief, and compare what each includes.

When do you need a fully qualified architect?

Legally, almost never for ordinary home projects, because anyone can provide architectural services in the UK; only the word architect is protected. You might choose a registered architect when you want that title and its regulation, or when the scheme is unusual, sensitive or design led. The test is the designer’s relevant experience.

Is architectural technologist a protected title?

Yes. The protected titles are Chartered Architectural Technologist, MCIAT and FCIAT, which sit under the Chartered Institute of Architectural Technologists. Someone who simply calls themselves an architectural technologist, without those letters, is not using a protected title, so ask which body they belong to.

Can an architectural technologist work on a listed building?

It depends on their experience, not just their title. Listed work needs a designer who has handled consent for similar buildings before. Ask to see completed listed or period projects and who dealt with the council, whether they are an architect or a technologist.

Related service

Design and Build

Craig Bellamy, founder of Madisons Commercial Solutions, laughing on site in navy work clothing

About the author

Craig Bellamy

Founder and director, Madisons Commercial Solutions

Craig Bellamy founded Madisons Commercial Solutions in 2009 and today leads it as a design and build company based in Latchingdon, Essex. He has 33 years in the industry, much of it delivering show homes for the UK’s leading developers. He is SMSTS qualified and personally oversees the interior finishes on every Madisons project. In May 2025 he spoke at Grand Designs Live.

Enquiries

Tell us what you have in mind

Call 01245 330103 or email [email protected]. We respond to every enquiry within 24 hours.

Get a quote